Showing 1–16 of 36 results
AS-PX50 – A Aramid Polyester tape TSR is a aramid paper laminated polyester adhesive tape with thermosetting rubber adhesive. AS-PX50 – N Nomex® Polyester tape TSR is a Nomex® polyester adhesive tape with thermosetting rubber adhesive. An enhanced dielectric strength is achieved via laminating the tape with a polyester film. For electrical insulation at high thermal…
Acetate Cloth Electrical Tape has excellent conformability in coil wrapping applications up to 105°C. Acetate cloth tapes also offer excellent absorption of resins and varnishes.
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”
More about Acetate Cloth Adhesive Tapes
“]
Acetate Cloth Tape is acetate cloth coated with thermosetting rubber adhesive, which gives the tape high adhesion, conformability, printability and it also has excellent insulating properties. These adhesive tapes are highly versatile and can withstand extreme temperature usage. The adhesive tape is hand tear-able which makes it easy to use, making it the perfect choice for specific electrical use applications.
In terms of the adhesive tape application, Acetate Cloth Tape is used in final insulation of coils. It is mainly used in lead-holding and inter-winding where high mechanical strength is required, during final wrapping of coils in transformers, relays, resistors, solenoids and ignition, insulator coil outer wrap in F.H.P. motors. The adhesive tape may also be used in end-turn and interphase insulation and cable harnessing. Thus, providing a wholesome solution, as they offer excellent insulation capabilities.
Acetate Cloth Electrical Tape has excellent conformability in coil wrapping applications up to 105°C. Acetate cloth tapes also offer excellent absorption of resins and varnishes. As this adhesive tape is made from flexible acetate fabric, it works well on uneven surfaces maintaining the effectiveness of the tape at its best and is optimal for use in binding harnesses, etc. Acetate Cloth Adhesive Tapes are used for many purposes and have properties that make them the best adhesive solution for different reasons.
Adhesive Specialities manufactures Acetate Cloth Tape for the Electrical Industry, which are pressure-sensitive, used to insulate electrical wires and cables. Suitable for the electrical industry, acetate cloth tapes are highly adhesive, offer excellent absorption, and have longer lives.
Acetate cloth adhesive tapes are suitable for electrical wire handling solutions, they are essentially used to insulate wires and cables that have electricity coursing through them. These adhesive tapes are comfortable, easy to use, and highly effective.
Reach out to our team at Adhesive Specialities today, to get customized solutions for your adhesive tape requirements.
[/accordion_item][/accordion]
Aramid/Nomex® Tape is coated with different types of adhesives. A special coat of fire-retardant Acrylic adhesive is applied, which is processed in-house and also a silicone adhesive can be applied as per the application or requirement.
Nomex® Paper is a series of insulation papers.
The temperature resistance for our acrylic adhesive Aramid/Nomex® paper tape is approximately 130°C & and for Thermosetting Rubber adhesive it is approximately 150°C (Applicable for 1 hour ).
Adhesive: FR Acrylic Adhesive or Thermosetting Rubber Adhesive.
Used in: Transformer’s motors, generators, and other electrical equipments. Aramid/Nomex® Tape can also be used in the manufacturing of cables.
LAMITHERM A/N-P-A/N is Aramide Paper or Nomex®- Polyester Film
Composition: LAMITHERM A/N-P-A/N is three layers laminate, consists of Pet film covered on both sides with H Class UL listed aramid paper
Properties: LAMITHERM A/N-P-A/N can withstand perfectly up to 200℃ due to usage of aramid paper laminated with special thermic resistant adhesive. Also due to its particular laminated aramid paper composition gave advantages like less water absorption, better and more regular dielectric strength values, very high tear strength, excellent mechanical properties for automatic application, etc.
Application: LAMITHERM A/N-P-A/Nis used as slot liner, phase and wedge insulation in electric motors, interlayer insulation for dry type transformers or in other electrical machines.
Available in various thicknesses
Standard colour :RED
[accordion title=”” open1st=”0″ openAll=”0″ style=””]
[accordion_item title=”More About Lamitherm AN & P-AN]
Aramide Paper or Nomex®- Polyester Film is what AS-151 LAMITHERM A/N-P-A/N stands for. The three-layer laminate LAMITHERM A/N-P-A/N is made of Pet film that is covered on both sides by H Class UL-listed aramid paper.
Due to the use of aramid paper bonded with an unique thermic resistant adhesive, LAMITHERM A/N-P-A/N can endure heat flawlessly up to 200°C. Another benefit of this particular laminated aramid paper composition was that it had good mechanical qualities for automatic application, reduced water absorption, higher and more consistent dielectric strength values, extremely high tear strength, etc.
It is available in various thickness with a standard red color.
For the electrical industry, Adhesive Specialities produces Aramide Paper or Nomex®- Polyester Film that are pressure-sensitive and used to insulate electrical wires and cables. These films come in a variety of thicknesses and in red color.
The use of aramid paper combined with a special thermic resistant adhesive allows LAMITHERM A/N-P-A/N to withstand heat up to 200°C without losing its integrity.
The three-layer laminate LAMITHERM A/N-P-A/N is manufactured in Bangalore, India by Adhesive Specialities and is made of Pet film with H Class UL-listed aramid paper on both sides. This film is appropriate for pressure-sensitive applications in the electronics sector that are used to insulate electrical wires and cables.
This particular laminated aramid paper composition was particularly useful for this business since it had excellent mechanical features for automatic application, decreased water absorption, stronger and more constant dielectric strength values, extremely high tear strength, etc.
For personalised solutions to your adhesive tape needs, get in touch with our team at Adhesive Specialities right away.
[/accordion_item][/accordion]
LAMIVOLT DMD F is consisting of PET film covered on both sides with PET -fleece impregnated with high-temperature resistant varnish fully cured.
Properties: LAMIVOLT DMD F has excellent electrical and mechanical properties. Thanks to its smooth surface LAMIVOLT DMD F CAN be easily processed on automatic machines. The impregnation with a high-grade varnish improves the thermal stability of the combination.
Application: LAMIVOLT DMD F is used as slot insulation and phase – insulation for low voltage motors or as interlayer insulation for electrical transformers or other electrical machines.
Available in various thicknesses.
Colour: Standard lightly blue color. According to a customer request, we can produce under other special colors like pink/red, yellow, green or natural.
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”More About Lamivolt DMD F”]
PET film coated on both sides with PET-fleece impregnated with completely cured high-temperature resistant varnish makes up LAMIVOLT DMD F.
PET film coated on both sides with PET-fleece impregnated with completely cured high-temperature resistant varnish makes up LAMIVOLT DMD F.
At Adhesive Specialities it is available in standard shade of light blue. But can made in different unique hues, such as pink/red, yellow, green, or natural, per a customer’s request.
Automotive Industry:
A fantastic solution for the automobile sector is the Lamivolt DMD F. LAMIVOLT DMD F may be processed fast by automated machinery because to its flat surface. The use of a quality varnish improves the combination’s resistance to heat.
The Lamivolt DMD F produced by Adhesive Specialties is perfect for the electrical sector since it has great mechanical and electrical properties.
LAMIVOLT DMD F is used as interlayer insulation for electrical transformers and other electrical equipment, as well as phase and slot insulation for low voltage motors.
Custom innovations are another area of expertise for Adhesive Specialities. For the best answer to your adhesive tape needs, get in touch with our staff at Adhesive Specialities right now.
[/accordion_item][/accordion]
Polyester Laminated Fleece Tape is a Electrical Tape with polyester /polyester non-woven laminated backing and a thermosetting rubber adhesive. This tape are characterised by their good ductility and resistance to tear. Withstands a temperature range of 32 to 266 °F (0 to 130 °C) so classified as B thermal class insulation. Applications: Ideal for securing…
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”More About Masking Tapes”]
Bangalore-based Adhesive Specialities manufacturers 5 types of masking tapes that are of various coatings and serve different industries.
Masking Tape 01 is a high-quality automotive tape with a natural rubber adhesive. This tape was created to assist protect surrounding surfaces from overspray, produce crisp paint lines, and be simply and neatly removed once the job is over. It is UV resistant and resists solvents or water from the paint. It’s also robust enough to hold plastic sheeting while yet allowing it to be removed without hurting the surface. For important paint masking applications, the tape can conform to curved and uneven surfaces.
Masking Tape 02 is a multipurpose masking tape with an acrylic emulsion adhesive coating. Used in general applications.
Masking Tape 04 is a hotmelt adhesive-coated general-purpose masking tape. This adhesive tape is simple to apply and is suggested for general indoor usage at a constant temperature in the wood industry. It adheres nicely to a variety of surfaces, both smooth and uneven, and is suitable with both solvent and water-based paints. It is simple to rip by hand and ensures that it may be removed quickly and easily.
Masking Tape 05Y is resin impregnated crepe paper covered with high tack pressure-sensitive natural rubber based adhesive. The tape was created to assist protect adjacent surfaces from overspray, produce crisp paint lines, and be simply and neatly removed after the job is done. For important paint masking applications in the automobile sector, the crepe paper backing can conform to curved and uneven surfaces. The tape shreds readily by hand, allowing for tool-free application.
Masking Tape 06 is a resin-impregnated crepe paper with a pressure-sensitive natural rubber adhesive that has a strong tack. This tape is designed to assist protect adjacent surfaces from overspray and produce clean paint lines by adhering effectively and resisting solvent or water from the paint. When done, the tape may be quickly and neatly removed. For important paint masking applications in the automobile sector, the crepe paper backing can conform to curved and uneven surfaces.
Bangalore-based Adhesive Specialties specialises in aeronautical tape. Because of its exceptional adhesive characteristics, Masking sticky tapes are commonly used. These adhesive tapes can be used for flash breakers, general purpose indoor and outdoor sealing, and more.
These adhesive tapes are perfect for aircraft applications since they can tolerate high temperatures. Adhesive Specialties produces a comprehensive range of high-quality adhesive tapes that are ideal for this industry’s needs.
Adhesive Specialities is a company that makes specialty tapes for the automotive industry. Adhesive tapes are used extensively in the automobile sector, for anything from heat/electrical protection to internal/external mounting.
Masking tapes are tapes that are covered with natural rubber adhesive and are ideal for this business. These masking tapes are very useful for automotive holdings as they are chemical and temperature resistant.
Masking Tapes are manufactured and developed by Adhesive Specialties to provide safety in practically all industries where there is a risk of accidents and slips, which might result in significant injuries and safety difficulties. The Masking Tapes are highly suggested for usage around building entrances and staircases where individuals are more likely to slip or trip.
Masking Tapes made in India are particularly effective in areas where there is a shift in elevation that might be slick at times. Adhesive Specialties employs the highest-quality raw materials to make this Masking Tape more efficient and long-lasting, so you get more value for your money.
Masking Tapes are made in India by Adhesive Specialities for the electrical industry. These pressure-sensitive masking tapes are used to insulate electrical wires and cables. Electrical adhesive tapes are very sticky, absorb well, and have a longer lifespan. The adhesive tapes are also flame retardant and have high tensile and impact strength.
Masking tapes can be used for a variety of applications, including basic insulation. They are extremely long-lasting in nature. Electrical adhesive tapes are comfortable to use, simple to apply, and extremely effective.
Masking Tapes, which are pressure-sensitive and used to insulate electrical lines and cables, are manufactured by Adhesive Specialities for uses in the electronics sector. Masking sticky tapes come in a variety of colours and thicknesses, as well as several varieties. Masking tapes are highly adherent, absorb well, are quite durable, and last a long time.
Masking tapes for the electronics sector are used to insulate wires and cables in devices that have electricity running through them. These sticky tapes are pleasant to use, simple to apply, and extremely effective.
Thermally insulating masking tape is made by Adhesive Specialties for the HVAC industry and is used to seal and join ducts in HVAC systems. These tapes are perfect for the heating and cooling sectors since they are extremely adhesive and have a high tensile strength.
Because of their wide operating temperature range, these Adhesive Specialties masking tapes operate effectively in both hot and cold environments. In roofing applications, these tapes are useful for flashing, joints, and insulation. Because it’s made of high-quality glue with super strong adhesion and holding strength, it’s a very reliable product for sealing joints and seams in industrial pipes for thermal insulation.
Adhesive Specialties is a company that specialises in specialised adhesive tape development for the LED industry. In manufacturing lines for LED light bar modules, aluminium frame bezels, and heat sinks, masking tapes made in Bangalore are used.
Adhesive tapes function well on LED devices and can also be used to hold components in place. Masking adhesive tapes are also suitable for transporting heat from metals and polymers due to their structure and components.
Adhesive Specialities, situated in Bangalore, produces masking tapes for the paint and coatings industry. Masking tapes can be used on a number of surfaces, including glossy surfaces, for both exterior and interior masking and leave no residue.
Masking tapes are created in Bangalore from high-quality crepe paper. These sticky tapes are used for indoor painting to protect surfaces from paint, dust, and oil spray.
Adhesive Specialities, is an India based tape manufacturer that specialises in adhesive tape development for the printing, packaging, and signs industries. The masking tape, which is widely utilised in this business, is our most recent in-house development. White masking tape is used for a variety of purposes, including screen printing and other typical usage. Adhesive Specialities manufactures application adhesive tapes that have high adherence.
They work well on a variety of surfaces, both comparable and dissimilar, and in both indoor and outdoor settings. Masking tapes are also very simple and quick to use. Adhesive Specialties has a large range of adhesive tapes that are suitable for this sector.
Adhesive Specialties makes adhesive tapes that can withstand the rigours of the renewable energy industry. Adhesive Specialities’ expertise is in mixing the correct blend of materials to create the most appropriate adhesive tape solution with exceptional performance.
Adhesive tapes for the renewable energy industry can endure a variety of conditions. Masking tape is one of the most commonly used tapes in this business and can be utilised for a variety of purposes.
Masking Tape is made by Adhesive Specialties and is used in the White Goods Industry to retain and secure components during transportation. These tapes are popular in this business because they do not leave any residue or adhesive markings when removed. Adhesive Specialties’ tapes also offer excellent adherence to steel, with a weight of up to 950 gms. These tapes are long-lasting and have a high elongation rate. Adhesive Specialties’ masking tapes, which are made in India, offer excellent holding power and can be utilised to hold and secure large components in the White Goods industry. These Masking Tapes are also extremely temperature resistant, allowing them to tolerate a wide range of temperatures for a variety of applications.
[/accordion_item][/accordion]
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”More About Polyimide Films”]
A Polyimide film is an Ideal insulating material that is primarily used in electrical applications. These films are used against high voltage applications in particular. With a Temperature resistance of -40 °C to 350 °C, these films are Suitable for battery insulation, Insulating copper conductors, and curing composite.
The use of Polyimide film does not stop here. They are also used in the electronics industry for flexible cables and as an insulating film on magnet wire as these films have a resistance to chemicals.
Apart from being used in the electronic industry, this tape is used in 3D printing as well.
Polyimide Film-1 are a special grade backing material that has an excellent balance of physical, chemical, and electrical properties over a wide range of temperatures with high-level dimensional stability and adhesion characteristics.
These films are used for insulation in pulling motors, submersible motors, nuclear power generating equipment and high-temperature resistance wire and cables.
Polyimide films are coated with a high-performance silicone adhesive The product is designed for numerous temperature masking applications and is approved for use in electrical insulation applications with class H requirements.
Polyimide films have an excellent dielectric strength with a very high-temperature mask during powder coating, anodizing, etching applications. These tapes are used in the automobile industry for wrapping switches, diaphragms, manifolds, sensors, and coils in seat heaters. In the aerospace industry, Mica tapes are used for the insulation of aircraft and spacecraft wings. The tapes are used on electrical applications where static is an issue.
[/accordion_item][/accordion]
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”Read More”]
It is a clear 40 micron LDPE film with an acrylic emulsion adhesive coating. SPT is self-adhesive and provides exceptional scratch and damage resistance. The peel force of the tape may be adjusted, and there is no adhesive residue. The tape adheres well to both glass and steel surfaces, leaving no residues.
Any rough surface can be protected using it with a high tack. Surface Protective Tape versatility allows it to be used in a wide range of sectors.
We’re the leading surface protection tape manufacturers in India specialises in aeronautical tape. Polyester powder coated adhesive tapes are frequently utilised due to their excellent adhesive properties. Flash breakers, general purpose indoor and outdoor sealing, and more can all be accomplished with these adhesive tapes. Because they can withstand high temperatures, these adhesive tapes are ideal for aircraft applications. We manufactures a wide selection of high-quality adhesive tapes that are perfect for the needs of this business.
In the automotive industry, surface protection tape are utilised for anything from heat/electrical shielding to internal/external installation.
It protect surfaces from stretches, damages, dust, grime and are perfect for this industry since they are heat resistant and come in a variety of adhesives, including solvent, acrylic, rubber-based, and acrylic emulsion, all of which can be utilized depending on the needs.
It provide safety in virtually every industry where there is a possibility of accidents and slipping, which can result in serious injuries and safety issues. One product, one material, one function, one application method, one distribution route, and one end-user are used to categorise the cassettes. Surface Protection tape are recommended for use around building entrances and stairwells, where individuals are more likely to trip or slip.
They are especially useful in locations where there is a change in elevation and the surface is prone to becoming slippery. Our tape protect surfaces from strains, damages, dust, and grime.
They are pressure-sensitive and used to insulate electrical wires and cables, are manufactured by Adhesive Specialities for the electrical sector. These polyester adhesive tapes come in a variety of colours and thicknesses, each tailored for a certain application. Electrical adhesive tapes are very sticky, absorb well, and have a longer lifespan. The polyester powder coated adhesive tapes are flame resistant and have high tensile and impact strength.
It can be used for a variety of applications, including basic insulation. They are extremely long-lasting in nature. Electrical adhesive tapes are comfortable to use, simple to apply, and extremely effective.
They are pressure-sensitive and used in the electronics industry to insulate electrical lines and cables. Surface Protection tape are extremely adhesive, absorbent, durable, long-lasting and are used in the electronics industry to insulate wires and cables that have electricity running through them. These sticky tapes are easy to apply, pleasant to use, and incredibly effective.
It is especially useful in locations where there is a change in elevation and the surface is prone to becoming slippery. It also protect surfaces from strains, damages, dust, and grime. The tape protects against gasketing, overheating, static for EMI/RFI shielding, and reduces friction, which can be a problem with any electrical item.
Surface Protection tape has thermal insulating qualities and are used to seal and join ducts in HVAC systems, are manufactured by Adhesive Specialties for the HVAC industry. Because these tapes are very sticky and have a high tensile strength, they are ideal for the heating and cooling industries.
Because of their wide working temperature range, these Protection tapes perform well in both hot and cold circumstances. These tapes are ideal for flashing, joints, and insulation in roofing applications. It’s a very trustworthy product for sealing joints and seams in industrial pipes for thermal insulation because it’s made of high-quality adhesive with super strong adhesion and holding strength.
We are specialised in the production of tape for the LED sector. LED light bar modules, metal frame bezels, and heat sink manufacturing processes all use Surface Protection tape. LED gadgets benefit from adhesive tapes, which can also be utilised to hold components in place.
We supplies die-cut and converted flexible parts for the LED market. The tape is commonly used for light diffusers and reflectors, vents, stealing gaskets, thermal interface solutions, and permanent and temporary bonding. It protect surfaces from strains, damages, dust, and grime.
It is used in the paint and coatings industry. Available in sticky tape with a polyester backing for easy application and clean removal. It can be used for both exterior and interior masking on a variety of surfaces and leave no residue, even on glossy surfaces. These adhesive tapes leave no residue, are resistant to water, chemicals, and abrasion, and can tolerate high temperatures.
They protect surfaces against strains, damages, dust, and filth. Adhesive Specialities offers an extensive range of tapes that can be made in cloth, films and paper.
Our tape are tough enough to endure the rigours of the renewable energy industry. The expertise of Adhesive Specialities lies in combining the right ingredients to offer the best adhesive tape solution with the best performance. Surface protection tape for the renewable energy industry are designed to withstand a wide range of circumstances.
Oil and gas, batteries, and energy storage are among the industries that potentially benefit from the tape. Adhesive Specialties makes Protective tapes to protect surfaces from strains, damages, dust, and dirt.
They are used in White Goods Industry to retain and secure components during shipping. These tapes are popular in this business because they do not leave any residue or adhesive markings when removed. Adhesive Specialties’ tapes also offer excellent adherence to steel, with a weight of up to 950 grams.
These premium Surface Protection tape with a high-quality natural rubber adhesive coating that adds durability and elongation to the tape. It also offer excellent holding strength and can be utilised to hold and secure large components in the White Goods industry. These tape are extremely temperature resistant, allowing them to tolerate a wide range of temperatures for a variety of applications.
[/accordion_item][/accordion]
The EPDM Foam Tapes are available 4 different variants : DS 3mm, DS 6mm, SS 3mm, SS 6mm.
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”
More about EDPM Foam Adhesive Tapes
“]
Manufactured and developed by Adhesive Specialities, Single Sided EPDM Foam Adhesive Tape is EPDM foam coated with hotmelt adhesive, which gives it good adhesion with high sheer strength and long ageing properties. These properties help with applications of this adhesive tapes on various different industries, such as Automotive, Construction and Interior, Electrical and HVAC (Heating, Ventilation and Air Conditioning). At Adhesive Specialities, EPDM Foam Tape is available in a double sided variant also.
Because of the good adhesion it provides, along with the high sheer strength, single sided EPDM Foam Adhesive Tape is suitable for glazing purpose, gap filling and insulation in panel applications. This adhesive tape is also often used in door seals, window seals, automobile truck and hood seals. The double sided EPDM foam adhesive tape also has similar properties.
Single Sided EPDM Foam Tape also comes in another variant, known as Glazing Tape is EPDM foam coated with hotmelt adhesive which gives it good adhesion with high sheer strength and long ageing properties. EPDM Foam Adhesive Tape in this variant is available in double side also.
Single Side EPDM Foam Adhesive Tape is used for sealing the area between the glass panel and window sash or door frame to prevent water or air leaks. This Adhesive Tape can also be used in gasket application and can be used in roll or die-cut form. Double Sided EPDM Foam Adhesive Tape is suitable for mounting and bonding purposes and is also used in refrigeration, stationery and die cuts.
Adhesive Specialities’ R&D Team is available for online appointments, you can reach out to our team to get the most suitable solution for your Adhesive needs today!
Adhesive Specialities manufactures specialised tapes for the Automotive Industry. From heat/electrical shielding to internal/external mounting, adhesive tapes play a major functional role in the automotive industry. Ideal for this industry, EPDM foam adhesive tapes are also heat resistant and available in various variants – single and double sided. Reach to us at Adhesive Specialities today, to get the perfect suitable solution for your adhesive tape requirements.
In the construction and Interior industry, adhesive tapes are used for bonding, building, sealing, protecting etc. Adhesive Tapes are also easy to use and prove to be effective in this industry.
Some of the popular applications of adhesive tapes in this industry may be as follows:
Adhesive Specialities manufactures adhesive tapes for the electrical industry, which are pressure-sensitive, used to insulate electrical wires and cables. EPDM Foam Adhesive Tapes are highly adhesive, have high sheer strength, and have longer lives. Electrical adhesive tapes are comfortable, easy to use, and highly effective.
EPDM Foam Adhesive Tapes are used for purposes ranging from duct board joint & seams; joining & sealing industrial pipes & duct insulation, roofing applications like flashing, joints & insulation, duct sealing & joining of HVAC (Heat, Ventilation & AC) systems, general purpose holding, patching, sealing application – indoor & outdoor.
Adhesive Specialities specialises in custom developments for the most suitable solution to your adhesive tape requirements. Reach out to us today!
[/accordion_item][/accordion]
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”
More about Aluminium Foil Tapes
“]
We at Adhesive Specialities, manufacture various types of Aluminium Foil Tapes these include Aluminium Foil + LDPE, Aluminium Foil Tape 30mic-AE, Aluminium Foil Tape 30mic-HM, Aluminium Foil Tape 30mic-Sol, Aluminium Foil Tape 30mic-si, Aluminium Foil 50mic-Sol, Aluminium Foil Tape 100mic-Si, Aluminium Foil Tape 100mic-Sol and Aluminium Foil Tape 150mic-Sol. Reach out to us, at Adhesive Specialities today, and we shall help you pick the most suitable Adhesive Tape for your requirements.
Aluminium Foil + LDPE is laminated adhesive tape, that is 20 micron aluminium foil laminated with 50 micron LDPE film, this comes without liner or glue.
This adhesive tape can be used in various applications involving Die-Cuts sticker application in the automotive industry, these work the best in application temperatures of 4°C to 40°C. Ensuring the surface of application is clean, dry and dust free before application helps give the best results, coupled with firm and even pressure on application for better adhesion results. For better shelf life and storage the adhesive tape needs to be stored in a cool and dry place without any prolonged exposure to direct sunlight.
Aluminium Foil Tape 30mic-Ae is Acrylic Emulsion tape, this Aluminium Foil Adhesive Tape is 30 micron aluminium foil coated with Acrylic Emulsion for better adhesion, Excellent reflective properties on this adhesive tape are seen due to the aluminium backing, this 30 micron Aluminium Foil Tape is available with hot melt, and solvent acrylic adhesive and with or without liner.
This Aluminium Foil Adhesive Tape is majorly used for ( HVAC ) Heat, Ventilation and Air Conditioning, application. This adhesive tape can also be used for seaming and sealing for fibreglass duct board and duct wrap to enhance appearance and maintain vapour barrier integrity. The minimum recommended temperature of application is 4°C (40ºF). It’s a useful option for high/low temperature applications too, like, EMI/RFI shielding, ducting, thermal spray masking and protection against welding arch.
This, like every other tape, needs to be applied on a surface that is clean, dry and dust free before application of the tape, with even and firm pressure for better adhesion results.
Aluminium Foil Tape 30mic-Hm Hot Melt tape, this Aluminium Foil Adhesive Tape is 30-micron foil coated with hotmelt adhesive, the Aluminium here offers excellent reflective properties. This 30 micron aluminium foil adhesive tape is also available with acrylic emulsion and solvent acrylic adhesive.
This Aluminium Foil Tape is often used in HVAC ( Heating, Ventilating, Air Conditioning ) purposes, in appliances, marine and aerospace industries, it can be used as seaming and sealing for fibreglass duct board, and duct wrap to enhance appearance and maintain vapour barrier integrity. For best results, application needs to be at least 4°C (40ºF). It can be used in high and low pressure applications EMI/RFI shielding, ducting, thermal spray masking and protection against welding arch. Apply on a clean and dry surface for maximum adhesion.
Aluminium Foil Tape – 30 mic Solvent is 30 micron Aluminium Foil Coated with Solvent acrylic adhesive, The 30 micron aluminium foil tape is also available with acrylic emulsion and hot melt adhesive. This tape is also available with or without liner.
This Aluminium Foil Tape is often used in HVAC ( Heating, Ventilating, Air Conditioning ) purposes, in appliances, marine and aerospace industries, it can be used as seaming and sealing for fibreglass duct board, and duct wrap to enhance appearance and maintain vapour barrier integrity. For best results application needs to be at least 4°C (40ºF). It can be used in high and low pressure applications EMI/RFI shielding, ducting, thermal spray masking and protection against welding arch. Apply on a clean and dry surface for maximum adhesion.
Aluminium Foil Tape 100mic-Si – this adhesive tape is a 100 micron aluminium foil tape coated with silicon adhesive and comes with dotted liner. It is an excellent conductor and the aluminium backing offers excellent reflective properties including heat reflection.
Aluminium foil tape is used for high/low temperature applications EMI/RFI shielding, ducting, thermal spray masking and HVAC (Heat, Ventilation and Air Conditioning) application. It is also used in appliances, marine and aerospace industries.
Aluminium Foil Tape 100mic-Sol made by Adhesive specialties is a 100-micron foil coated with solvent acrylic adhesive and comes with liner. It is an excellent conductor and the aluminium backing offers excellent reflective properties including heat reflection. Aluminium Foil Adhesive Tape is used for high/low temperature applications, EMI/RFI shielding, ducting, thermal spray masking and HVAC (Heat, Ventilation and Air Conditioning) application. It is also used in appliances, marine and aerospace industries.
Aluminium Foil Tape 150mic-Sol made by Adhesive Specialties is a 150-micron foil coated with solvent acrylic adhesive and comes with a silicone release liner. The aluminium backing offers excellent reflective properties.
Aluminium Foil Adhesive Tape is used for HVAC (Heat, Ventilation and Air Conditioning) application. It is also used in appliances, marine and aerospace industries. It can also be used as seaming and sealing for fiber glass duct board and duct wrap to enhance appearance and maintain vapour barrier integrity. The minimum recommended application temperature is 4°C (40ºF).
Adhesive Specialties manufactures Aluminium Foil Tapes that can be used for holding, patching and sealing purposes in addition to HVAC applications for joining and sealing.
The Aluminium Foil Tape is an amazing alternative for the automotive industry considering it’s excellent reflective properties that reflects heat and it’s lightweight. These tapes are ideal for HVAC applications like joining and sealing and thus help closing and insulation of air ducts and shafts.
Aluminium Foil Tapes manufactured by Adhesive Specialties are an ideal to the electrical industry owing to its aluminium backing that makes it a great conductor and adds on with its reflective properties that help deflect heat.
Adhesive Specialities also specialises in custom developments. Reach out to our team at Adhesive Specialities today, to find the ideal solution to your Adhesive Tape requirements.
[/accordion_item][/accordion]
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”More about Copper Foil Tape from Adhesive Specialties”]
Copper Foil Tape has a conductive adhesive coating. Its aggressive adhesion results in superior bonding, making it a popular choice in a variety of consumer and industrial applications. It has a very low electrical resistance, is conductive by nature, and comes with a removable lining for easy handling.
The tape should be kept in a cool, dry area and should not be exposed to direct sunlight for lengthy periods of time. The product should be used within 12 months of the manufacturing date to get the best results.
Adhesive tapes are utilized throughout the construction and interiors industry, from the beginning to the ultimate product.
Adhesive tapes are used in the construction and interior design industries for bonding, constructing, sealing, and protecting, among other things. Adhesive Tapes are also simple to use and have an aesthetic as well as a long-lasting appeal, which has contributed to their widespread use in the business.
The following are some of the most common adhesive tape applications in this industry:
[/accordion_item][/accordion]
[accordion title=”” open1st=”0″ openAll=”0″ style=””][accordion_item title=”More about Cross Filament Tape”]
The fibreglass reinforced backing of Cross Filament Tape – Residue Free is coated with solvent adhesive and has a high tensile strength. The wear, moisture, and scuff resistance of the fibreglass reinforced backing is exceptional. Adhesive Specialities’ Cross Filament Tape – Residue Free is designed for use in heavy-duty air and oil-filled transformers, ground insulation reinforcement, holding, and separation, motor coil bundling, and coil covering. Lead anchoring and coil banding are two examples of applications for the tape.
Adhesive Specialities also offers Cross Filament Tape that has a hotmelt adhesive-coated fibreglass reinforced backing with a high tensile strength. The fibreglass reinforced backing resists wear, dampness, and scuffing well. Due to its great tensile strength, Cross Filament Tape is utilised in bundling/heavy duty packing of heavy things such as pipes, steel coils, and tyres. It’s also employed in the manufacturing of cricket bats and jumbo bags.
Adhesive Specialties manufactures and develops Cross Filament Tapes to provide safety in virtually any industry where there is a possibility of accidents and slippage, which can result in serious injuries and safety issues. Cross Filament adhesive tapes are highly recommended for usage around building entrances and stairwells, where people are more likely to slip and fall.
Cross Filament Tapes are particularly useful in regions with a change in elevation that can be slippery at times. Adhesive Specialties uses the highest-quality raw materials to create Cross Filament Tape that is more efficient and long-lasting, providing you with more bang for your buck.
Adhesive Specialities makes pressure-sensitive adhesive tapes for the electronics industry. Cross Filament adhesive tape is a high-performance conductive grid adhesive tape that is ideal for cleanroom and static-free workstations.
Adhesive Specialties manufactures anti-static adhesive tape for industrial and electronics applications. They’re comfortable to wear, easy to use, and incredibly effective.
Adhesive Specialties makes thermally insulating Cross Filament tape for the HVAC industry, which is used to seal and connect ducts in HVAC systems. These tapes are perfect for the heating and cooling sectors since they are extremely adhesive and have a high tensile strength.
Because of their wide working temperature range, these adhesive speciality aluminium fibreglass tapes operate effectively in both hot and cold temperatures. In roofing applications, these tapes are useful for flashing, joints, and insulation. Because it’s comprised of high-quality glue with super strong adhesion and holding strength, it’s a very reliable product for sealing joints and seams in industrial pipes for thermal insulation.
Adhesive Specialities specialises in the production of specialised adhesive tapes for the printing, packaging, and sign industries. The adhesion properties of our adhesive tapes are exceptional. These sticky tapes can be used to connect sign boards, are useful in flexo printing, and are age and UV resistant.
They operate well on a wide range of surfaces, both similar and dissimilar, and in both indoor and outdoor environments. Adhesive Specialties offers a wide selection of adhesive tapes that are appropriate for this industry. The numerous adhesive tapes we offer are suitable for both general-purpose and specific applications, depending on your requirements. The adhesive tapes used in this industry can be used for sealing, packing, fastening, and mending.
[/accordion_item][/accordion]